Tool Room Engineers
Industrial in Faridabad
www.toolroomengineers.com
Address
Kila No-119-14/2, Plot No.3, Gali No-2, Pali-Bhakri Road, Near Ultimate Dharam Kanta. P.C. 121004, Faridabad, Faridabad.What you should know about Tool Room Engineers
is highly experienced in analyzing the machining needs of your part and recommending the proper broaching machine system. Broaching is done on a variety of equipment styles and equipment sizes depending on your part application. Quite often systems are recommended based on a family of similar parts.
Broaching machines are sized by tonnage and stroke, in general the more material being removed from the part and greater the size of the part the greater the tonnage and stroke required. For example, a horizontal style broaching machine can be between 6 tons and 50 tons of force and 48” to 120” of stroke
Fully Automated Vertical Broaching Machine Cell horizontal-broaching-machine-automatic-load-unload Parts Machined Using Broaching Machine
TOOL ROOM ENGINEERS Broaching Systems offers a full lineup of broaching machine sizes and styles:
Sizes:
Stroke – from 12””to 120″
Tonnage – from 1 to 50 tons
Styles:
Horizontal Broaching Machines
Standard Horizontal Hydraulic Broaching Machine
Vertical Broaching Machines
Table-Up Broaching Machine
Pull Down Broaching Machine
Recondition Broaching Machines of any brand, size and style
The proper broaching machine system is determined by first analyzing your part. Our engineers will need the following to begin:
Part print with all dimensions and tolerances before and after broaching
Material type (casting, forging, rolled stock etc.)
Hardness of the material when broached
Heat treatment both before and after broaching
Machining operations that precede and follow the broaching operation on all surfaces
Surface that will be used to locate for the broaching operation
Maximum stock that will be removed by broaching
Finish required after broaching
Production volume and rate required for your part
Number of parts to be broached in a single pass
Any existing broach tool drawing
Any floor space limitations for the broaching machine
Delivery destination
Once these basic requirements are understood our engineers can size the broaching system to your particular application.
Horizontal Broaching Machines
TOOL ROOM ENGINEERS Broaching Systems Horizontal Broaching machines are built of heavy duty construction and are ideal for a wide variety of part applications including:
Internal involute splines
Internal SAE splines
Rifling
Receivers
Key lock slots
Internal “D” forms
Keyways
Internal Serrations
Horizontal Broaching Machine Horizontal Broaching Machine Internal Spline & Forms Part Applications 15 ton x 72″ Stroke High Speed Horizontal Broaching Machine Rear View High Speed Horizontal Broaching Machine High Speed Horizontal Broaching with Automatic Load and Unload
TOOL ROOM ENGINEERS Horizontal Broaching Machines range in size between 6 Tons – 50 Tons with 48″ to 120″ of Stroke. Please contact us for specific floor plan dimensions.
Social networks
Products
Services
Brands
Other users also viewed:
Photos and videos
Additional information
Payment methods we use:
- Bank transfer
- Bank check
- Other payment methods
Reviews of Tool Room Engineers (0)